whitbunny
Lieutenant
Hockey Expert
shp(o~20171;; b~1;; i~1;; u~0;; s~1;; a~1;; p~2,0,3,6,4,5,1,7,21;; )
Posts: 2,131
|
Post by whitbunny on Oct 6, 2006 22:38:59 GMT -5
Another commonly asked question is where one can get the enviro font that is used on the KB cards, now that the bunny blanks are out and people are designing their new bootleg Omegas/homemade ideas/etc. There's a link at the bottom of this page that's a free download of the Enviro font: solosong.net/masq.html
|
|
|
Post by LotH on Oct 7, 2006 4:41:45 GMT -5
Another commonly asked question is where one can get the little red speedo lined with faux fur and with an official potato", now that summer is over and winter is approaching. There's a link at the bottom of this page that'll lead to nowhere, but it's free: This secret (shhhh) link is available until noon today (unless admin deletes this message). Noon came and went, so I had to delete the link ~4:00. Sorry, LotH. ~Tyberius
|
|
|
Post by LotH on Oct 7, 2006 17:26:30 GMT -5
Thanks Ty, I forgot I put it in ...
|
|
jjlwb
Seaman Apprentice
shp(o~-10;; b~0;; i~0;; u~0;; s~0;; a~0;; p~20;; )
Posts: 42
|
Post by jjlwb on Mar 29, 2008 2:06:38 GMT -5
Cool Been Looking for this!! Thanx
|
|
JEBANVIL
Petty Officer 1st Class
shp(o~-1052;; b~1;; i~0;; u~0;; s~1;; a~1;; c~006633;; p~20;; )
Posts: 349
|
Post by JEBANVIL on Apr 2, 2008 7:28:33 GMT -5
Ok I got it but I can't find it in word. What do I need to do to get it there?
|
|
|
Post by fifisdead on Apr 3, 2008 0:33:11 GMT -5
put it in your fonts folder...
if you did that while Word was open, you might have to restart Word...
|
|
redgleefulbunny
Seaman Apprentice
shp(o~-180;; b~0;; i~0;; u~0;; s~1;; a~0;; p~20,11;; )
Posts: 44
|
Post by redgleefulbunny on Apr 3, 2008 19:43:09 GMT -5
NOOOOOOOO! I was two years too late
|
|
|
Post by hikuru17 on Mar 25, 2010 23:04:26 GMT -5
Hey I got the font, but now how do i get that black shadow behind it to make it look more legit?
|
|
|
Post by TheDavii on Mar 26, 2010 5:56:07 GMT -5
Hey I got the font, but now how do i get that black shadow behind it to make it look more legit? What software are you trying to use? I'll tell you what I do in Inkscape: Though there are actually three parts, I use four to make it easy on myself. The basic three are (from front-most, to rear-most layers): - White fill for the card title, with white fill only (no stroke), all in uppercase letters.
- Black-filled copy of the same text, with a black stroke of 1.5 points (1 point=1/90 inch in Inkscape). This gives the very thin outline (.75 points) on all edges that are not hidden by the next layer up.
- Black-filled copy of the same text, with a black stroke of 2 points (again, 1 point = 1/90 inch in Inkscape), offset slightly left and slightly up. If used on an "E", this layer should be sufficiently "up and to the left" such that the black completely fills in the space between the two lower rungs of the "E". A letter "B" should have the upper hole nearly (but not completely) filled.
That gives the exact effect you see, though it is clear from examining hundreds of cards that JY varied the amount of "up and to the left" over the production run of the cards. I made a "template" that I re-use and mine are more consistent since I discovered the best way to make these "shadows". (For a long time I had been trying to create them with only two copies of the text--and it simply doesn't work and doesn't look right in nearly all cases). Additionally, to make it easier on myself, I "clone" the text to make the layers listed above. I group those three clones so I can move/resize them as one (or, you can resize the source of the clones, but that is trickier). This way, I edit the original and all those cloned layers change, so if I change a card title, the change is a few seconds, not minutes (which it took to edit before I decided to use clones).
|
|
|
Post by fifisdead on Mar 26, 2010 8:09:23 GMT -5
Photoshop also utilizes the clone concept...
|
|
|
Post by TheDavii on Apr 2, 2010 10:54:37 GMT -5
Photoshop also utilizes the clone concept... Would you (please) describe how to accomplish the same thing in Photoshop?
|
|
|
Post by fifisdead on Apr 3, 2010 17:29:33 GMT -5
group layers...
|
|
andy
Seaman Apprentice
Posts: 16
|
Post by andy on Feb 10, 2011 11:19:52 GMT -5
Dead link...
|
|
|
Post by joeyskywalker on Feb 10, 2011 11:29:58 GMT -5
|
|
andy
Seaman Apprentice
Posts: 16
|
Post by andy on Feb 10, 2011 11:36:14 GMT -5
Wow, thanks... quick response...
|
|